After buying an apartment, there are things it’s important to do to keep it in good condition despite the passing of time. For example, finding a crack in one of the walls is something that could happen, but there’s no reason to worry.
Most of them can be repaired relatively easily, depending on their size and the wall in question, using the right building materials. Interior and exterior walls can experience cracks for a variety of reasons, and there are many ways to fix them before they get worse. If you act quickly, you may not need the help of a specialist.
Interested in learning what some of them are? Then read on and find out how to repair cracks in your apartment wall !
1. Check the cracks
Cracks can appear anywhere, both inside and outside a home. In interiors, they are most visible on walls and ceilings, although smaller ones can be hidden by wallpaper. Cracks can also appear on the floor.
Because they’re found under carpets and other types of flooring, they’re harder to detect. However, you can pay attention to any changes in the floor, whether they’re uneven surfaces, slight rises, croatia phone number library or loud squeaks. All of these can indicate a bigger problem.
Cracks in exterior wallsare rare, and they require much more external force or pressure to cause this level of damage. This is also the reason why different materials are used at different stages of construction and for different parts of the building.
Once the crack is located, its size and depth must be analyzed. A small crack can be repaired in different ways than larger, deeper ones. It also depends on where it’s located and whether the wall is weight-bearing or not.
Once you have an idea of the extent of the damage, you can think about what to do about it and what building materials you need to carry out the repair of cracks in your home .
2. Prepare cracks for repair
For larger cracks, remove any debris such as broken or cracked cement pieces, dust, and debris using a flat-head screwdriver and a steel-bristle brush. To facilitate the coating’s adhesion, reported data showed a year use a hammer and chisel to slightly widen the crack and smooth out the edges.
This will provide a larger surface area and prevent the material from slipping out. Simply hold the chisel diagonally and chip away at the pieces. Remove any debris and dust with the brush and rinse the crack with water. Then, pat the area dry with an old towel.
You might be interested in: How to remove moisture from walls?
3. Repair fine cracks
Hairline cracks can usually be repaired with a vinyl cement bonding compound. If recommended by the manufacturer, apply this or a coat of primer to create the best possible bond between the old surface and the filler.
Use an old or inexpensive paintbrush to apply the liquid to the crack and around its edges. Wash the brush immediately after use with soap and water or discard it.
Use a putty knife or trowel to apply the vinyl material in several coats, bgb directory following the manufacturer’s instructions. Mix only the amount you need for each coat. Press firmly so the initial coat penetrates the crack and allow time to dry between coats.
Alternatively, you can apply a cement mixture to fine cracks if they’re wide enough to accept sand. To do this, in a small bucket, mix a little cement and sand with enough water to form a consistent paste. In a separate container, combine a small amount of cement with more water, enough to make something like cement paint.
If possible, paint the inside of the crack with the thinner cement mix. This will act as a primer. Then, work the cement mixture in well with a spatula or trowel and smooth the mixture.
Let the filler sit for about an hour, then run the trowel or spatula over the entire surface in a circular motion, blending it well with the surroundings.
4. Seal the walls
Now that the crack has been filled and the filler has dried, you can apply waterproof cement sealer. This will protect the concrete from any water infiltration. Existing paint and coatings must be removed from the surface, and the cement must be able to absorb the water.
For best results, apply the sealer to the filler with a brush. The second coat can be applied with a larger brush or roller.
Now you know 4 tips for fixing cracks in your apartment walls . Remember to always pay attention to these details to prevent them from becoming bigger problems and fix them as soon as possible. We hope this information has been helpful!
Edifica Real Estate has 15 years of experience developing projects in the most established districts of Lima and other cities. You’ll find the best apartments and offices. If you’d like more information about our projects, please contact us, and we’ll get back to you shortly .